Blogtrottr
批踢踢實業坊 Examination 板
 
The Best Way to Manage your Money.

Start using Mint today to set a budget, track your goals and do more with your money.
From our sponsors
[課業] 效率問題
Apr 13th 2014, 23:02, by kuanfu

作者kuanfu (黑暗騎士)

看板Examination

標題[課業] 效率問題

時間Sun Apr 13 23:02:17 2014

電機機械變壓器的效率這邊我有些地方一直看不懂 就是書上寫變壓器工作在額定電壓 額定電流 額定負載的情況下效率為Po/Pin = Po/Po+Ploss = VICosΘ/(VICosΘ+Pi+Pc) 其中Pi是鐵損跟負載無關所以是固定的 Pc是銅損跟負載電流平方成正比 假設是滿載的1/m倍時 效率為[(1/m)*VICosΘ]/[(1/m*VICosΘ)+Pi+((1/m)^2*Pc)] 我有兩個問題搞不懂 1.我知道滿載就是變壓器工作在額定電壓跟額定電流跟額定負載的情況 假設半載就是 滿載的1/2倍 那所謂半載指的是半載負載 半載電流 但是電壓還是額定電壓這樣嗎? 還是不是這個意思? 我真的搞不太懂滿載的1/m倍到底是說什麼東西是滿載的1/m倍 2.如果滿載的1/m倍指的是半載電流 額定電壓 半載負載這樣 那銅損Pc=I^2*Req 如果是滿載的1/m倍 這樣銅損就變成(1/m)^2*Pc沒錯 可是輸出功率書上寫的是變成1/m*VICosΘ=(1/m)*Po 問題是VICosΘ=I^2*RL 不是應該也是變成成(1/m)^2*Po才對嗎? 還是我的觀念有問題? 板上前輩可以解說一下嗎? -- ※ 發信站: 批踢踢實業坊(ptt.cc), 來自: 114.39.148.240 ※ 文章網址: http://www.ptt.cc/bbs/Examination/M.1397401340.A.50C.html ※ 編輯: kuanfu (114.39.148.240), 04/13/2014 23:09:12

This entry passed through the Full-Text RSS service — if this is your content and you're reading it on someone else's site, please read the FAQ at fivefilters.org/content-only/faq.php#publishers.

You are receiving this email because you subscribed to this feed at blogtrottr.com.

If you no longer wish to receive these emails, you can unsubscribe from this feed, or manage all your subscriptions
arrow
arrow
    全站熱搜

    yisoajkls 發表在 痞客邦 留言(0) 人氣()